|Group||Pipe Threading Lathe|
|Min. Order||1 piece|
|Terms of Payment||L/C, T/T|
|Max. Swing Diameter:||630mm|
|Max. Swing Over Bed||630mm|
|Max. Swing Over Carriage:||350mm|
|Max.processing Pipe diameter:||126mm|
|Range of spindle speed changes:||12~640 r/min|
|Automatic Grade:||Automatic lathe|
Best Selling Pipe Threading Large Spindle Bore Precision Heavy Duty Lathe Machine Price
Best Brand Cheap Cnc Lathe Equipment Pipe Threading Lathe Machine
The digitally-control pipe threading lathe,a special tool to turn and mill pipe threads,characterized by larger diameter of the spindle bore(over 130mm in general) and chucks installed before and behind the head stock so as to hold and process tubular or rod pieces of latge diameters. In addition to milling cylindrical/conical SI/BS pipe threads,it can be used to replace the general lathes to mill outer diameters,bore holes,and planes..
The application fields of Pipe Thread Lathe machine are the Processing and repairs of drill pipe, drill collar, joint, kelly bar and sleeve of Oil sector, Metallurgic Industry, Geological Prospecting, Chemical Industry & Hydropower.
We use electric furnace smelting, resin sand molding casting technology,avoid sand holes, stoma casting internal defect effectively, all the accessories are assayed by imported spectrum analyzer, it assures the quality of the casting . The casting had been through second thermal aging treatment with good stability.
we can can absolutely ensure the casting quality after the United States imported equipment precision spectrometer analysis.
The bed of floor type is the whole structure. The rigidity and width of guide way on the bed of lathe is good enough. The guide way is through high-frequency quenching, the slide guide way joint SD compound soft belt. to make more wear-resisting and lower friction factor. The lead screw is the whole structure (not butt). The saddle is wider and thicker than before, the machine is running more stable. And the cutting ability is better.
With the super audio quenching treatment ,the hardness of Body guide rail can reach above HRC55 degrees, it can keep the hardness high accurate, and prolong the wear resistance and service life.
The 3 boxes of lathe were processed by Taiwan’s CNC boring and milling machine center. The other tools are processed by CNC lathe and machine center to ensure the precision of the box and tools.
The lathe bed we produced is all research and development by our own engineers. These all can greatly increased the rigidity and are helpful to widen and Thicken the dragging plate,
The large plate guide guide rail (X) is also go through the super audio quenching treatment, so it increased hardness and then could guarantee the service life of equipment more efficiently.
The equipment will firstly tested by the laser interferometer imported from Britain to test repeated positioning accuracy of X, Z direction in order to make sure the accuracy. Then the whole machine will be tested according to the National standard whole machine.
Our enterprise have got the ISO9001-2008 quality system certification and the European Union CE certification.
1. DRC research and develop Pipe threading lathe for more than 50 years, and our company was restructured in the year 2002 . More than 200 staff ,9 professional engineers ,cover an area of 120,000 square meters.
2.CNC pipe threading lathe is a special model of CNC turning lathe ,mainly used in oil and gas field, machinery manufacturing, geological exploration, thread repair function and so on.
3. Customized service, we can make the pipe threading lathe according to clients’ requirements.
4. We have our own casting workshop, guarantee good quality of the machine.
5. A big production capacity, always have machines in store, though so many orders we can also guarantee delivery time.
6. Certificate of CE and ISO
7. We have exported to Dubai , Malaysia,the USA ,Russia, Iran etc.
8. We make OEM for Knuth Germany about 8 year ,no quality problem , the orders are added every year.
High Efficiency CNC Pipe Thread Lathe QK1327 For Hot Sale Standard configuration:
CNC system: GSK ,Fanuc
The spindle servo speed,
Front and rear three-jaw manual chuck;
Vertical four-position electric turret,
Automatic lubrication system,
Turning cooling system
High Efficiency CNC Pipe Thread Lathe QK1327 For Hot Sale Select Configure
CNC system: KND, Siemens, Fanuc,
Electric chuck, pneumatic chuck, hydraulic chuck,
Horizontal six-position electric turret,
The rear bracket.
1.DRC use electric furnace smelting, resin sand molding casting technology,avoid sand holes, stoma casting internal defect effectively, all the accessories are assayed by imported spectrum analyzer, it assures the quality of the casting . The casting had been through second thermal aging treatment with good stability.
2.The bed of floor type is the whole structure. The rigidity and width of guide way on the bed of lathe is good enough. The guide way is through high-frequency quenching, the slide guide way joint SD compound soft belt. to make more wear-resisting and lower friction factor. The lead screw is the whole structure (not butt). The saddle is wider and thicker than before, the machine is running more stable. And the cutting ability is better.
3.The 3 boxes of lathe were processed by Taiwan’s CNC boring and milling machine center. The other tools are processed by CNC lathe and machine center to ensure the precision of the box and tools.
4.First step of the accuracy test of the equipment is testing the repeat accuracy of X and Y axis with Renishaw laser interometer imported from Britain. After that, inspecting and accepting the whole equipment based on the enterprise standards, guarantee the accuracy of the machine tool.
The QK series CNC pipe thread lathe produced by DRC Machinery is a special series of machine tools for drilling and metallurgical industries to process various pipes and pipe threads.It mainly undertakes the processing of turning pipe threads, and can turn cylindrical and conical pipe threads of metric and inch systems.In addition, the machine can also undertake the work of ordinary lathes.QK series CNC pipe thread lathe adopts the international standard and is designed according to the requirements of pipe thread processing industry. It can accurately process various kinds of threads and realize the function of CNC lathe.The machine adopts semi-closed protective device, feeding is supported by homemade ball screw, equipped with automatic lubrication system and double-chuck clamping mechanism.QK series CNC pipe thread lathe is characterized by high rigidity and high accuracy.Applicable to the oil, chemical, metallurgical industry oil pipe, drill pipe, pipe thread processing.
DRC Machinery main exports :QK1313, QK1319, QK1322, QK1327, QK1330, QK1335, QK1343 CNC pipe threaded lathes, spindle bore from 135mm to 445mm.
( More Detailed Picture of Pipe Threading Lathe )
DRC is a group company ,which is professional in products and sales of advanced CNC machine tools . Acting full operation of the six machine tool production company's overseas sales.
DRC is located in Dalian, which is one of the largest seaport cities of China.Our products exported to Russia, Dubai, Hungary, Italy, Argentina, the Philippines, India, Iran, more than 50 countries.
DRC has six factories in China, which covers many kinds of mechanical equipment.
Boring and Milling Machine
Laser Cutting Machine
Dental Milling Machine
Glass Tempering Furnace
Special Machine for Pipe Threading ,Valve Milling, End Facing Machine and so on
Model and specifications
Max.swing over bed
Max.swing over carriage
Hole through spindle
Max.processing Pipe diameter
The actual machining lengt
Number of spindle speed changes
Range of spindle speed changes
Tool post style
Vertical 4 Stations
Knife rest translocation time
Repeated positioning accuracy
Processing workpiece precision
Workpiece surface roughness
Bed quenching hardness
Power of main motor