|Min. Order||1 piece|
|Terms of Payment||L/C, T/T|
|52mm Width of guide way:||394mm|
|Width of guide way:||394mm|
|Diameter of tailstock center sleeve:||75mm|
CDE series conventional lathes is mature, and this series lathes have the following characters, such as big power, rigidity, spindle speed range, apply force or speed cutting, can be completed on a variety of shaft and disc-type parts of the external cylindrical surface, conical surface , grooving, chamfering, drilling and tapping machining processes, and can processes metric thread, inch thread, modulus thread, thread pitch and taper thread, the knife can cut short cone vehicle longitudinal feed and feed on the turret motor complex exercise can cut the long cone, excellent for large complex parts and can show superiority.
( More Detailed Picture of CDE series Lathe Machine )
8.Apron with rapid traverse control.
1.High rigid structure design
This machine adopts the traditional horizontal lathe layout, the whole design, rigid, meets the safety standard. The main basic parts of bed and head of the bed are all cast in resin sand, the artificial aging treatment and the stability of the whole machine are superior. The bed body adopts HT300 material, the guide rail of the bed surface of the lathe is quenched by high frequency, the guide rail is G50, and the guide track life is improved.
2.High efficiency and multipurpose design
It can complete the external cylindrical surface of shaft and disc type parts, taper and grooving, chamfering, cutting drilling and tapping, and can process the commonly used metric thread, thread pitch modulus (special thread to consult), the knife frame can be cut short for motor vehicles the composite motion cone, vertical turret into the feed can cut a long cone of motor vehicle.
3.High rigidity spindle
The head stock machine control handle with centralized control, easy operation, the spindle system supported by three point, and the bearing of high precision, strong rigidity, brake axis and the positive and negative changes to the hydraulic control, sensitive and reliable braking, can transform a button to stop the speed, the bed head box with forced lubricating oil pressure, the head stock has beautiful appearance, good rigidity, high precision, stable operation, low noise, easy assembly, small deformation characteristics of spindle thermal.
4.Fast crossbar drive
The slide box of the machine is equipped with a fast moving device, which can quickly move to the desired position.
5.The tail seat with motor drive and high stiffness tail socket
The machine tool is equipped with the motor drive device, especially the larger length specification, which reduces the labor intensity and provides the working efficiency.
6.Chip cooling system
In order to ensure the clean of the site, there are dandruff plates in the lower part of the bed to ensure that the chip is removed from the processing zone. The independent cooling system is equipped with large flow cooling pumps to provide mandatory cooling for turning processing.
1. What is your minimum order quantity and warranty?
MOQ is one set, and warranty is one year.
2.What CNC system do you use?
FANUC, SIEMENS, MISTSUBISHI, GSK etc. It depends on your choice.
3.When is the delivery time?
We will delivery it within 90 days after received your payments
4. How to handle the warranty period?
During the warranty period, because of product quality problems, the company is responsible for free maintenance, if need to change parts, we be responsible for free replacement.
If the machine problem is not belonging to our machine quality problems, when the buyer needs us send engineers to give repairing service, we charge the appropriate cost.
5.Can your company send the technical personnel to our company and direct our workers for free?
When the machine arrive the buyer’s installation site, we timely send mechanical and electrical engineers to install according to the buyer's schedule, the buyer undertakes board and lodging of personnel abroad in the process of installation, and also USD100.00 per day per person. The seller will cooperate with the buyer to deal with visa and installation preparation before going abroad.
6.What's the trade assurance?
When you look at our alibaba website, you will see the trade security, its purpose is to let every buyer confidence, it can protect your payment, ensure that the suppliers fulfill their commitment to the date of shipment and the quality of the products (as you stated in the purchase order).
If the supplier finds breach of these contractual obligations, alibaba will indemnify you for 100% of your trade guarantee.
Therefore, I believe that through trade guarantees, you will have greater confidence to cooperate with us.
Our company has US $128000' trade assurance limit, it can guarantee your interests.
7.Do your products support trade assurance?
Yes, our products are all supported.
Send Inquiry Here to Get a Free Work-piece Sample!
|Max. swing over bed||400mm|
|Max. swing over carriage||220mm|
|Max. swing over gap||700mm|
|Width of guide way||394mm|
|Dia. of spindle bore||52mm|
|Taper of center sleeve||Morse No.6|
|Diametrical pitch thread||160-7-16DP(50)mm|
|Section of tool shank||25×25|
|Travel of top slide||150mm|
|Max.travel of cross slide||348mm|
|Pitch of longitudinal leadscrew||12mm|
|Travel of tailstock center sleeve||150mm|
|Diameter of tailstock center sleeve||75mm|
|Taper of tailstock center sleeve||Morse No.5|
|Main motor power||7.5kW(50Hz)/5.5kW(60Hz)|